knob_os/knob_os.ino

165 lines
5.6 KiB
C++
Raw Permalink Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

// nex_buddy —— 圆环交互固件(自研,烧录在 app1)
//
// 主文件只做四件事:初始化硬件、注册应用与服务、驱动主循环、把启动过程演给人看。
// 分层:hal(硬件)/ core(框架)/ ui(圆环控件与导航)/ apps(业务)/ services(后台能力)
#include <Arduino.h>
#include <lvgl.h>
#include "src/config/AppConfig.h"
#include "src/core/Log.h"
#include "src/core/Settings.h"
#include "src/core/AppManager.h"
#include "src/hal/Display.h"
#include "src/hal/Storage.h"
#include "src/hal/Power.h"
#include "src/hal/Encoder.h"
#include "src/hal/Haptic.h"
#include "src/ui/Theme.h"
#include "src/ui/Shell.h"
#include "src/ui/Splash.h"
#include "src/apps/ClockApp.h"
#include "src/apps/GalleryApp.h"
#include "src/apps/MusicApp.h"
#include "src/apps/AstroApp.h"
#include "src/apps/UserApp.h"
#include "src/apps/WeatherApp.h"
#include "src/apps/SettingsApp.h"
#include "src/services/NetService.h"
#include "src/services/WebPortal.h"
#include "src/services/AstroService.h"
#include "src/services/WeatherService.h"
#include "src/services/PlatformService.h"
#include "src/services/OtaService.h"
#include "src/services/LinkService.h"
#include "src/services/AudioLink.h"
#include "src/services/MediaSync.h"
#include "src/services/RemoteDebug.h"
static void onSettingChanged(const char* key) {
if (strcmp(key, "sys.bright") == 0) {
hal::setBrightness((uint8_t)settings.getI(key));
} else if (strcmp(key, "sys.accent") == 0) {
theme::applyAccent((uint8_t)settings.getI(key));
lv_obj_invalidate(lv_scr_act());
} else if (strcmp(key, "sys.haptic") == 0) {
hal::hapticSetLevel((uint8_t)settings.getI(key));
} else if (strcmp(key, "sys.tz") == 0) {
svc::net.applyTz(); // 改时区立即生效,不用重启
}
}
// 背光从暗到亮,开机第一秒的观感差别很大
static void fadeBacklight(uint8_t target, uint32_t ms) {
uint32_t t0 = millis();
while (millis() - t0 < ms) {
float k = (float)(millis() - t0) / (float)ms;
uint8_t b = (uint8_t)(5 + (target - 5) * k);
hal::setBrightness(b);
lv_timer_handler();
delay(6);
}
hal::setBrightness(target);
}
// 主循环跑在独立任务里,而不是 Arduino 默认的 loop()。
// 原因:默认 loopTask 只给 8KB 栈,图片解码、TLS 握手这类操作会直接爆栈。
// 这里给 20KB,并且只在一个任务里碰 LVGL(LVGL 不是线程安全的)。
static void knobTask(void*) {
for (;;) {
hal::displayLoop();
ui::shell.loop(millis());
svc::link.loop();
svc::audioLink.loop();
svc::net.loop();
svc::platform.loop();
svc::mediaSync.loop(); // TF 卡媒体增量同步:到点自己派任务,不阻塞 UI
svc::astro.loop();
svc::weather.loop();
svc::ota.loop(); // 进度合并 + 到点重启;必须有人每帧推进
svc::webPortal.loop();
svc::remoteDbg.loop();
delay(3);
}
}
void setup() {
Serial.begin(115200);
delay(200);
LOGF("=== %s %s ===", KNOBOS_NAME, KNOBOS_VERSION);
settings.begin();
settings.onChange(onSettingChanged);
// 开机守卫要尽量早:升级后连崩三次固件,就在进任何 UI 之前切回上一个槽。
// 放在 settings.begin() 之后是因为它要读写 NVS。
svc::ota.begin();
// 屏幕初始化内部会调用 lv_init(),必须先于任何 LVGL 样式操作
if (!hal::displayBegin()) {
LOGF("FATAL: display init failed");
while (true) delay(1000);
}
theme::init(); // 依赖 lv_init() 建立的内存池
// ---- 启动动画:先亮屏,再逐步把真实初始化进度画出来 ----
ui::splash.build();
fadeBacklight((uint8_t)settings.getI("sys.bright"), 420);
ui::splash.step(8, "点亮屏幕", 60);
hal::storageBegin(); // 没插卡也继续跑
ui::splash.step(28, "挂载存储", 80);
hal::powerBegin();
hal::hapticBegin();
ui::splash.step(44, "检查电源", 90);
hal::encoderBegin(nullptr);
ui::splash.step(54, "读取旋钮", 70);
// 应用注册顺序 = 主菜单顺序 = 设置里"开机启动"的编号
appMgr.add(&apps::clockApp);
appMgr.add(&apps::galleryApp);
appMgr.add(&apps::musicApp);
appMgr.add(&apps::astroApp);
appMgr.add(&apps::userApp);
appMgr.add(&apps::weatherApp);
appMgr.add(&apps::settingsApp);
ui::splash.step(68, "加载应用", 90);
ui::shell.begin();
ui::splash.step(82, "装配界面", 80);
// 后台服务
svc::link.begin();
svc::audioLink.begin(); // 同一条 UART1:音轨走 921600 推给副控
svc::net.begin();
svc::platform.begin(); // 读 NVS 里的设备 token,决定是否已绑定
ui::splash.step(94, "连接网络", 70);
svc::astro.begin();
svc::weather.begin();
svc::mediaSync.begin(); // 读 TF 本地清单,等绑定+联网后自动增量同步
svc::webPortal.begin();
svc::remoteDbg.begin();
ui::splash.step(100, "准备就绪", 160);
ui::splash.finish();
// 启动自检:相册是最容易"看不见"的一环(屏上看不到就等于没证据),
// 开机把解码链路跑一次并留日志,远程也能判断问题出在扫描还是解码。
apps::galleryApp.diagDecode();
LOGF("boot done, heap=%u psram=%u",
(unsigned)ESP.getFreeHeap(), (unsigned)ESP.getFreePsram());
xTaskCreatePinnedToCore(knobTask, "knobos", 20480, nullptr, 2, nullptr, 1);
}
void loop() {
// 主循环已经交给 knobos 任务,这里只留一个空转,避免两边同时操作 LVGL
delay(1000);
}